Extract Craft is the creator of the Source Turbo essential oil extractor. Their innovative table-top extraction systems provide a safe, affordable, convenient, and reliable oil extraction solution for the masses. No longer do you need thousands of dollars and a PhD in chemistry to safely extract your own essential oils -- pick up a Source Turbo today!
You are here
Extract Craft - Source Turbo Essential Oil Extraction System
The Source Turbo is a safe, clean, very easy to use appliance that uses vacuum and gentle warming to extract and concentrate essential oils. Throughout the process, the alcohol is recovered for re-use saving the user a lot of money and paying for itself in a very short time. The fully enclosed, closed-loop system also restricts unwanted odors to almost nothing.
Trouble Shooting Info
|Vacuum pump runs continually||Outer collector is not sealing||Check the lower seal and collector are securely in place and clear of any debris. Try pressing down on the lid gently while the vacuum pump is running. Confirm the pressure relief screw is turned fully to the right and has not been cross-threaded. Use the mobile app to view the vacuum level. When the pump is running, the vacuum level should be steadily rising and will turn off when it reaches 100%. If the problem persists inspect the glass cylinder composing the collector for chips and damage. If the glass is obstructed or damaged a vacuum seal is not possible.|
|Comm icon in mobile app is red||Bluetooth not on / Source not pairing||Check your mobile device settings and make sure you have Bluetooth ON. Plug in the Source and make sure the green light on the base is ON before launching the Source app.|
|The Source process turned off but the extraction is not finished||Automatic shut down due to time allowance||The Source process runs for a maximum of 120 minutes, then automatically shuts off. To run a longer extraction, simply restart it by pressing the green button or by using START PROCESS from the mobile app.|
|Power outage or circut breaker||To restart, unplug the Source and allow it to cool. Once it is cool, plug it back in and restart the process.|
|The green light does not illuminate||The power cord is not plugged in/outlet not getting power||Check that the power cord is firmly plugged into the outlet. Check your breaker or switches that control your outlet. Test another appliance in that outlet to verify it is working.|
|Cannot tell if the process is running||Green button is lit, but the Source is quiet.||Once the Source has been started, if you are unsure whether the process is stopped or running, you can check two ways: observing the green illuminated button which will blink once every 10-15 seconds when in operation; or by using the app to view the status.|
- Performance: Process 1/2- 2 oz of dry material at a time
- Safety Feature: 120 minute max run time per start
- Connectivity: Bluetooth BLE
- Power: 110-120 VAC 60 Hz, 2.1 A
- Height: 10
- Width: 7"
- Depth: 7"